How to Know What Anti-Bot Service a Website is Using?

Websites use anti-scraping mechanisms to identify bot traffic and automated requests, such as web scrapers. Thus, the first step to scrape without getting blocked is identifying the web application firewall used.

In this guide, we'll answer a commonly asked question: "How do you know what anti-bot a website uses?". For this, we'll explore two tools to identify which WAF service is used. Additionally, we'll explore four factors that trigger anti-bot detection and how to optimize them for web scraping. Let's get started!

WhatWaf

WhatWaf is an open-source tool that identifies most of the existing WAFs on websites. Its workflow can be explained in three steps:

• A request is sent to the target page to retrieve the response object.
• The returned HTML and response headers are analyzed to search for the common anti-bot signatures, such as the popular "attention required" message of Cloudflare.
• If the anti-bot service is detected, it uses a combination of "HTTP Tampering" techniques to attempt bypassing the WAF.

WhatWaf provides several features to configure the HTTP requests and organize the anti-bot identification process, including:

• Passing a file containing URLs to request.
• Customizing the request headers and payload.
• Adding proxies and using Tor to change the IP.
• Adding timeouts and rate-limiting throttlers.

How to Install WhatWaf

WhatWaf is built using Python. The easiest way to install and run it is using Linux. If you are on Windows, you can easily install Ubuntu from the Microsoft store or use WSL2.

The first step is ensuring that Python is installed:

python --version
# or
python3 --version

Most Linux systems have Python pre-installed. If it's not, use the following command to install it:

sudo apt-get install python3

Next, clone the WhatWaf repository for the source code and install the required packages:

git clone https://github.com/Ekultek/WhatWaf.git
cd whatwaf
sudo pip install -r requirements.txt

Now that our installation is complete, let's jump into the WhatWaf usage details.

How to Use WhatWaf

To start, let's explore the available WhatWaf features using the --help flag:

sudo ./whatwaf --help

You will get the below output:

In the above image, we can see the mandatory arguments.

To request a web page, we can use the --url argument. Let's attempt to identify the anti-bot service used by how-to-scrape-indeedcom:

sudo ./whatwaf --url https://indeed.com

Here is the result we got:

WhatWat has successfully identified How to Bypass Cloudflare When Web Scraping in 2026 as the protection service used. It also tried the tampering bypass checks scripts, but it failed with our target domain.

That being said, WhatWaf results aren't always accurate and shouldn't be taken for granted. For example, let's identify the WAF service used on how-to-scrape-leboncoin-marketplace-real-estate, which we know that it uses How to Bypass Datadome Anti Scraping in 2026:

sudo ./whatwaf --url https://www.leboncoin.fr/recherche?category=9&real_estate_type=1

We can see that WhatWaf has incorrectly identified the protection service as CloudFront. Let's explore another tool to see if we get any better results!

Wafw00f

Wafw00f is another popular tool for identifying WAFs. Its technical concept can be briefly described by the following steps:

• Sending a regular HTTP request to the target domain server.
• Analyzing the response object if the WAF protection is encountered.
• Sending multiple requests with potential malicious configurations to further trigger the WAF if it isn't encountered.
• Analyzing the previous responses using simple algorithms to guess the WAF service if it wasn't detected.

Unlike the WhatWaf tool we explored earlier, the Wafw00f tool doesn't provide additional utilities for bypassing the WAF services.

How to Install Wafw00f

To install Wafw00f, we have to clone its source code repository first:

git clone https://github.com/EnableSecurity/wafw00f.git

Next, move to the cloned directory and execute the setup.py file for installation:

cd wafw00f
python setup.py install

The Wafw00f installation is now complete. It can be used with the following command:

# Linux
wafw00f https://example.com/

# Windows
python main https://example.com/

How to Use Waf00f

To start, let's explore the available options using the wafw00f --help command:

We can see that wafw00f comes with minimal features. In the web scraping context, we are interested in the following arguments:

• --findall: To list all the detected firewalls on a given web page. It can prevent getting false results as websites can include multiple anti-bot services.
  
• --noredirect: To disable request redirections, which can be useful as anti-bots can redirect the request to a different web page if it's detected.
  
• --proxy: To change the request IP address using proxy servers if the domain is restricted to a specific geographical location.

Let's attempt to identify the protection services on the previously evaluated websites. All we have to do is pass the URL with the wafw00f command. We'll also use the --findall argument to list all the detected WAFs:

wafw00f https://indeed.com --findall

Here is the output we got:

Wafw00f has correctly identified the WAF service used as Cloudflare.

Next, we'll request leboncoin.fr again to see if we get any better results than the previously failed example with WhatWaf:

wafw00f https://leboncoin.fr --findall

Again, the WAF service was incorrectly identified. From this, we can conclude that the most available tools for identifying WAFs aren't always accurate, and we have to put in extra manual effort.

How to Bypass Anti-Bot Services

In this section, we'll briefly explore how to bypass anti-bot services. Each of the below factors plays a significant role in calculating a trust score for the incoming traffic. Based on this score, the anti-bot decides on one of the below scenarios:

• Proceed to the final resource behind the protection.
• Request a 5 Proven Ways to Bypass CAPTCHA in Python challenge.
• Block the request entirely.

TLS Fingerprint

When a request is sent to a domain using the HTTPS protocol, both the client and host have to negotiate the encrypting methods to initiate the connection challenge. This leads to creating a JA3 Fingerprint.

If this fingerprint is different from those of normal browsers. The request can be detected. Thus, having a resistant TLS fingerprint is essential to prevent detection.

IP Address

The IP address contains metadata about the request, such as reputation, location, and ISP, which are used as a part of the trust score calculation.

Moreover, anti-bot services count the number of requests sent from a particular IP address. If the requesting rate is high during a specific time interval, the IP address can be throttled or blocked.

Therefore, using high-quality residential or mobile proxies is essential to avoid IP address blocking of protection systems.

HTTP Details

The HTTP details, including headers and How to Handle Cookies in Web Scraping, exchange essential information with the requested web server. These header values are managed automatically when navigating using web browsers. However, these values can be neglected when web scraping, resulting in requests that differ from those made by normal users. Hence, the requests get detected.

Another important aspect is the HTTP protocol. Most of the websites and web browsers currently operate over HTTP2, while many HTTP clients still use HTTP1.1. Hence, a request sent with the HTTP1.1 can provide an obvious sign of automation.

Hence, correctly managing and rotating headers, like the user-agent-header-in-web-scraping, while using HTTP2 is important to mimic human traffic and prevent anti-bot systems identification.

JavaScript

JavaScript on the browser allows anti-bot services to gain several details about the connecting client, such as operating system, hardware specification, browser name and version. These values can be used to detect the usage of headless browser automation libraries, such as web-scraping-with-selenium-and-python, web-scraping-with-playwright-and-python, and web-scraping-with-puppeteer-and-nodejs. Since human users don't browse these libraries, requests get detected and blocked.

WAF services can also use automatically solvable JavaScript-based challenges before proceeding with the final resource. However, many web scraping requests are sent from HTTP clients without JavaScript support, leading to blocking.

Therefore, using headless browsers while hiding their traces using tools like how-to-use-puppeteer-stealth-what-does-it-do and Undetected ChromeDriver can help bypass anti-bot blocking.

Based on the details explored, we can draw two conclusions.

• Available tools for identifying web application firewalls on websites aren't always accurate.
• Bypassing anti-bot mechanisms while scraping is complicated and requires paying attention to different details.

What about a tool that manages all this for us?

Bypass Anti-Bots With ScrapFly

ScrapFly is a web scraping API that automatically identifies and bypasses any anti-scraping protection. It also allows for scraping at scale by providing:

Here is how we can bypass anti-bot services using ScrapFly by simply sending an API request. All we have to do is enable the asp argument, select a proxy pool and country:

from scrapfly import ScrapeConfig, ScrapflyClient

scrapfly = ScrapflyClient(key="Your ScrapFly API key")

response = scrapfly.scrape(ScrapeConfig(
    url="website URL",
    asp=True, # enable the anti scraping protection to bypass blocking
    proxy_pool="public_residential_pool", # select the residential proxy pool
    country="US", # set the proxy location to a specfic country
    render_js=True # enable rendering JavaScript (like headless browsers) to scrape dynamic content if needed
))

# use the built in Parsel selector
selector = response.selector
# access the HTML content
html = response.scrape_result['content']

Learn more about Web Scraping API and how it works.

Summary

In this guide, we explained how to know which anti-bot service a website uses. For this, we went through a step-by-step guide on installing and using two similar tools: WhatWaf and Wafw00f.

Then, we briefly explored how to bypass web application firewalls while scraping using four aspects. In a nutshell, these are:

• Using resistant TLS fingerprint.
• Using residential or mobile proxies to split the traffic across multiple IP addresses.
• Correctly managing and rotating request headers.
• Using modified headless browsers that are hard to detect, such as Puppeteer-stealth.